Power Flushing
Power Flushing in Swindon
Power Flushing at K&S PLUMBING HEATING LTD
Search the market for the best in water treatment and conditioners and magna clean by ADEY are the leading manufacture in the UK which gives the best results, K&S PLUMBING HEATING LTD are proud to use mana cleans on all there system, boiler changes that are installed
MagnaClean® Professional sets an industry standard for plumbing and heating engineers when it comes to protecting and maintaining both new and existing heating systems.
In an age of advanced and high efficiency gas and oil boilers there has never been a greater need to safeguard what amounts to one of the most expensive investments in the modern home - the central heating system.
Even a small build-up of iron oxide in a standard or modern efficiency boiler results in substantial efficiency loss and fuel wastage. So, not only does the system perform inadequately, it also costs more to run and maintain.
MagnaClean Professional is a proven, high efficiency, full-flow magnetic filter designed to tackle all central heating systems removing virtually 100% of the suspended black iron oxide.
The benefits of this simple technology are immediate:
- Simple installation and effortless servicing, saving time and money
- Immediate results and system protection following installation
- No ongoing running costs
- Quick and easy chemical dosing
- Long operational life AND guaranteed for TWO years
- Reduced carbon emissions
MagnaClean® Professional - How It Works
Modern central heating systems with high efficiency boilers are clean, efficient and economical, but ONLY if operating at peak performance. The natural process of black iron oxide build-up soon impairs performance and eventually clogs the boiler and radiators.
The majority of systems suffer from black iron oxide contamination. This creates thick sludge deposits that are the result of corrosion taking place within radiators and other metallic components. The oxide particles range from very large to sub-micron with the latter leeching into the system water continuously during use.
Installing MagnaClean Professional to a new or existing central heating system is simple. It comes with purpose designed triple sealed valves, which allow 360º rotation. Also included is a spanner for lid removal and a custom made spanner for easy valve operation. Servicing is a two minute job. Simply remove and wash the filter's sheath at the annual boiler service.
How it works in seconds!
- Black iron oxide sludge is deposited in a container...
- The MagnaClean Professional filter is placed into the container...
- Within seconds the water starts to clear as MagnaClean Professional sets to work...
- After just ten seconds virtually all sludge has been trapped and the water is clear...
- The MagnaClean Professional filter is removed for easy cleaning.
Installation
MagnaClean® Professional is suitable for all central heating systems. Locate a site for your MagnaClean Professional allowing access for servicing. DO NOT FIT BETWEEN BOILER AND VENT PIPE ON CONVENTIONAL SYSTEMS. In both diagrams, position A is best practice while B is suitable.
Drain central heating system. Professional installers will be able to plug-off F and E tank and release system pressure. Measure and mark a 105mm section for a 22mm unit and a 190mm for a 28mm unit.
Using a suitable cutter, remove the marked section of pipe.
Assemble the valves onto the pipes, hand-tight, lubricating the olives with jointing paste. Secure the MagnaClean unit to the valves - without washers. DO NOT over-tighten the flange nuts.
Grip the MagnaClean canister and tighten the compression fittings. Again, do not over-tighten. Loosen valve flanges andinstall rubber seals. Refill heating system.



